Maintenance work on the carrier
7.13 Compressed air system
13.02.2018
Maintenance manual 3 302 719 en 7 - 77
GMK6300L-1
7.13 Compressed air system
7.13.1 Draining water from the compressed air system
Spare parts
and tools
Prerequisites – The truck crane must be raised on outriggers or parked over an
inspection pit.
–
The compressed-air supply is completely full;
à Manual de instrucciones.
– The engine must be switched off and secured against unauthorised use;
à p. 2 - 3.
Draining water
from the com-
pres
sed air system
• Actuate the valves (1) on the air
reservoirs (2) to (7).
If a great deal of water escapes
• Have the compressed air drier checked
or replaced by
Manitowoc Crane Care or
an authorised GROVE dealer or your
qualified repair crew.
Designation Quantity GROVE part no.
Valve 6 01570750
Gasket 22 x 27 Cu DIN 7603 6 00117142
To Next Page
Loading...
