Maintenance work on the superstructure
8.17 Other maintenance work
13.02.2018
Maintenance manual 3 302 719 en 8 - 121
GMK6300L-1
8.17.3 Lubricating the crane cab door
Grease, spare
parts, tools
–Brush.
Prerequisites – The turntable is locked.
– The engine must be switched off and secured against unauthorised use;
à p. 2 - 3.
Lubricating
• With the door closed, clean the rails (1)
outside.
• Lubricate the rails (1) lightly with a brush.
• Open the door completely using the handle
– the door locks in place.
• Clean the rails (2).
• Lubricate the rails (2) and the rollers (3)
lightly with a brush.
• Check if the door moves smoothly on the
rails and if it locks easily.
If the door is sluggish or does not close properly, have it reset by
Manitowoc Crane Care or an authorised GROVE-dealer.
Designation GROVE part no.
Grease: RHUS 2 AF, 1 kg can
03325215
To Next Page
Loading...
