Maintenance work on the superstructure
8.3 Engine
8 - 22 3 302 719 en Maintenance manual
GMK6300L-1
13.02.2018
Changing
Oil filter
• Place a receptacle underneath the engine.
• Change the oil filter (1) with the socket
wrench – torque 50 Nm (36 lbf ft);
à Engine
manufacturer’s documentation
.
• Leave the receptacle in place for the
oil change.
Draining oil
• Screw the connecting piece and hose onto
the valve (1) and drain the oil into the
receptacle;
à Handling the valves, p. 7 - 92.
• Remove the connecting piece and hose
from the valve and remove the receptacle.
Topping up oil
• Top up with fresh oil through the filler
neck (2);
à p. 8 - 13.
O
Risk of environmental damage due to leaking consumables.
Always let consumables drain into suitable receptacles. Wipe up any
consumables tha
t escape.
Store/dispose of consumables and any soaked equipment properly.
Ask about the applicable regulations.
O
Risk of environmental damage due to leaking consumables.
Use the supplied connecting piece and hose and a receptacle with sufficient
capacity to drain the oil.
To Next Page
Loading...
