Maintenance work on the superstructure
8.14 Hook blocks
8 - 110 3 302 719 en Maintenance manual
GMK6300L-1
13.02.2018
The diagram gives an example of the arrange-
ment of the grease nipples (1), (2) and (3) on
a hook block.
There are more grease nipples on the other
side.
• Clean the grease nipples on all hook blocks
and grease them using a grease gun.
Having them
dismantled
Depending on the manufacturer, there are different maintenance intervals
for the dismantling of the hook blocks. The maintenance-free sheaves are
also greased at this time. Some manufacturers recommend dismantling
every 4 years or after 500 operating hours.
• Ask Manitowoc Crane Care about the maintenance intervals for the
hook blocks supplied to you.
• Have the hook blocks dismantled by Manitowoc Crane Care or an
authorised GROVE dealer or your qualified repair crew.
To Next Page
Loading...
