Manitowoc Grove GMK6300L-1

Maintenance overview
5.2 Maintenance plans
13.02.2018
Maintenance manual 3 302 719 en 5 - 17
GMK6300L-1
5.2.8 Maintenance plan Y 3
5.2.9 Maintenance plan Y 5
Y 3
Maintenance work on the CARRIER:
every 36 months
Engine
–Notes;
à Engine manufacturer’s documentation à p. 7 - 11
– Changing the coolant
à p. 7 - 23
Maintenance work on the SUPERSTRUCTURE:
every 36 months/after 3,000 oper. hrs.
Engine
–Notes;
à Engine manufacturer’s documentation à p. 8 - 11
– Changing the coolant
à p. 8 - 23
– Change the silicate cartridge
à p. 8 - 25
Hoists
– Having a partial inspection carried out
à p. 8 - 46
Y 5
Maintenance work on the CARRIER:
every 60 months/100,000 km (62,000 mi)
– Have the Cardan shaft between the transmission on the engine and the transfer
case replaced by
Manitowoc Crane Care or an authorised GROVE dealer.
Maintenance work on the SUPERSTRUCTURE:
every 60 months/after 5,000 oper. hrs.
Cable drums and slewing angle sensor
– Lubricating the slewing angle sensor
à p. 8 - 105