FlyMarker
®
mini 85/45 plus and 120/45 plus
Operating Manual
2. Safety
2.1 Symbols and terms
These symbols indicate warnings, prohibitions and advice that point to hazards and must
always be heeded:
This warning means that death, severe bodily injury or
serious property damage will occur if the precautions are not
taken.
This warning means that death, severe bodily injury or
serious property damage may occur if the precautions are
not taken.
This warning means that death, minor bodily injury or minor
property damage may occur if the precautions are not taken.
This symbol indicates advice for making work easier or a
reference to further information.
This document uses the following terms:
Marking file
All data for marking are contained in a marking file.
Marking command
A marking file consists of one or more marking commands.
2.2 Intended use
The FlyMarker
®
mini marking system is only for marking metals and hard plastics. Living things,
explosive products and products that are under pressure should never be marked with
FlyMarker
®
mini.
All uses of the FlyMarker
®
mini other than those indicated are prohibited! The complete product
must never be modified or rebuilt. Never throw or drop the FlyMarker
®
mini. During the marking
process always hold the FlyMarker
®
mini firmly with both hands
Any application of the marking system other than its intended use is considered misuse and is
forbidden. The manufacturer accepts no liability for personal injury or property damage due to
unintended use.
To Next Page
Loading...