Markator FlyMarker mini 85/45 plus - Repairing Malfunctions; FlyMarker mini Cannot Be Turned On (Display Remains Dark)

FlyMarker
®
mini 85/45 plus and 120/45 plus
Operating Manual
138
6.2 Repairing malfunctions
If you cannot resolve errors yourself, contact
MARKATOR
®
service.
( Chapter “Your contact at MARKATOR®”, page 2)
6.2.1 FlyMarker
®
mini cannot be turned on (display remains dark)
a.
Cause:
The battery is not inserted precisely.
Solution:
Remove the battery and insert it precisely.
(→Chapter “Changing/charging the battery”, page 44)
(→Chapter “Battery charging status”, page 43)
b.
Cause:
The battery is dead.
(→Chapter “Battery charging status”, page 43)
Solution:
Remove the battery, charge it, and insert it precisely.
(→Chapter “Changing/charging the battery”, page 44)
(→Chapter “Battery charging status”, page 43)
If the FlyMarker
®
mini remains switched off for more than 2
days (e.g. on weekends), the battery must be removed from
the machine.
If the battery remains for longer than 2 days on the switched
off FlyMarker
®
mini, this may cause a deep discharge of the
battery.
In this case warranty will expire.
c.
Cause:
There is an internal data error.
Solution:
Remove the battery, wait about 10 seconds, and put it back in.
If this doesn’t work, contact MARKATOR
®
service.
(→ Chapter “Your contact at MARKATOR
®
”, page 2)