Markator FlyMarker mini 85/45 plus - How the FlyMarker mini Handheld CNC Marking System Works

FlyMarker
®
mini 85/45 plus and 120/45 plus
Operating Manual
8
1.2 How the FlyMarker
®
mini handheld CNC marking system works
Without any previous knowledge, any user can start marking with the FlyMarker
®
mini in a
minute or less. The quick start guide included is all that’s needed to start marking right away.
An operator who only wants to mark doesn’t need a password.
A user, who wants to change the presets temporarily, needs a user password. These presets
can’t be changed permanently with this password.
An administrator who wants to make permanent changes to the presets requires an
administrative password and this operating manual, which provides a wealth of information on
FlyMarker
®
mini’s many capabilities.
The user password and administrative password can be changed by the administrator.
FlyMarker
®
mini offers:
- Simple operation
- Flexible use
- Security against false operation
- Protection from unintended manipulation.
Passwords should be shared only with caution.