Markator FlyMarker mini 85/45 plus - Technical Data; FlyMarker mini 85;45 plus; FlyMarker mini 120;45 plus

FlyMarker
®
mini 85/45 plus and 120/45 plus
Operating Manual
142
8. Technical data
8.1 FlyMarker
®
mini 85/45 plus
Marking range (x/y):
85 x 45 mm
Character heights:
1.0 to 29.9 mm, continuous in 0.1 mm increments
Marking position:
Flush left, flush right, centered and limited range
Font:
5x7 and 9x13
Characters available:
Upper- and lowercase alphabet with umlauts, numbers 0 to 9
and the following special characters: . , / - _ <> ( ) * = [ ] ß % Ø +
? ! ; : # „ ° ^
Markable material:
Almost any material can be marked — from plastic all the way to
hardened steel (max. 62 HRC).
Height tolerance
compensation:
Up to 5 mm (with constant marking depth)
Ports available:
USB-A, USB-B, Ethernet
Weight:
3.1 kg, incl. battery
Marking pin drive:
Electromagnetic (low noise)
Nominal operating voltage:
18 VDC
Needle head:
Electromagnetically oscillating
Noise emission (at idle,
without workpiece)
76 dB(A), ANSI 1.4 Type 2/IEC 651 Type 2
8.2 FlyMarker
®
mini 120/45 plus
Marking range (x/y):
120 x 45 mm
Character heights:
1.0 to 29.9 mm, infinitely variable in 0.1 mm steps
Marking position:
Left-aligned, right-aligned, centered and area delimitation
Font:
5x7 and 9x13
Characters available:
Large and small alphabet with umlauts, numbers 0 - 9 and the
following special characters: . , / - _ < > ( ) * = [ ] ß % Ø + ? ! ; : #
„ ° ^
Markable material:
Almost any material can be marked - from plastic to hardened
steel (max. 62 HRC)
Height tolerance
compensation:
Up to max. 5 mm (with constant marking depth)
Ports available:
USB-A, USB-B, Ethernet
Weight:
approx. 3,2 kg incl. 2Ah battery
Marking pin drive:
Electromagnetic (low noise emission)
Nominal operating voltage:
18 VDC
Needle head:
Electromagnetically oscillating
Noise emission (at idle,
without workpiece)
Noise emission (idle, without workpiece)