FlyMarker
®
mini 85/45 plus and 120/45 plus
Operating Manual
3. First use
Risk of injury due to falling parts!
- Use caution
- Unpack with care
- When choosing a place to set up and assemble the
FlyMarker
®
mini, consider its weight.
Parts may fall or tip. This can cause injury.
1. Unpack the FlyMarker
®
mini and check the delivery for completeness and transport
damage. Damages in transit must be recorded immediately (damages on the device as
well as on the packaging). Please report to the responsible shipping company, depending
on which insurance covers the damage. (Chapter „Scope of supply FlyMarker
®
mini
85/45 plus and 120/45 plus handheld CNC marking system“, page 9)
The FlyMarker
®
mini is delivered with the marking pin
installed.
2. Remove the transport guard.
Risk of damage
Do not throw away the transport guard. Attach it again every
time the FlyMarker
®
mini is transported.
Before attaching the transport guard, allow the marking head
to cool.
To Next Page
Loading...
