Markator FlyMarker mini 85/45 plus - Page 42

FlyMarker
®
mini 85/45 plus and 120/45 plus
Operating Manual
42
If the value is set to 0 (zero seconds), FlyMarker

mini does
not turn on.
Setting the standby time
FlyMarker

mini switches into standby mode if there has been no marking or no key has been
pressed within a specified time.
Path FlyMarker

mini:
Administrator  Switch to Level 2  F7 Settings F5 System (power management > t-Standby)
If the value is set to 0 (zero seconds), the switch to standby
mode does not occur.