FlyMarker
®
mini 85/45 plus and 120/45 plus
Operating Manual
Width
Indicates the DMC’s width in millimeters.
Height
Indicates the DMC’s height in millimeters.
Grid
For determining the DMC’s grid. The grid number is used to determine the DMC’s number of
grid points.
Bidirectional
Bidirectional = ON
Marking time is decreased.
Bidirectional = OFF
For reasons of mechanical hysteresis, bidirectional
marking is not recommended. This recommendation
should especially be heeded with small data matrix
codes.
To Next Page
Loading...
