Chapter 8 Information service Section 2 Special tools
8-15
Special tools
PartNumber
∙
PartName
∙
Description
Special tools
PartNumber
∙
PartName
∙
Description
09910-32812
Crankshaft installer
09913-80112
Bearing installer
Used to install the crankshaft in the
crankcase. Used to install the
crankshaft in the crankcase.
Used to drive bearing in.
09910-34510
Piston pin puller
09915-63310
Compression gauge adapter
Use to remove the piston pin.
Used with compression gauge.
09915-54510
Fuel pump pressure gauge
09915-64510
Compression gauge
Measure fuel pressure of fuel pump.
Measure cylinder compression.
09913-50121
Oil seal remover
09915-74510
Oil pressure gauge
Used to remove the oil seal.
Measure oil pressure of 4-stroke
engine.
09913-70122
Bearing installer
09915-74531
Oil pressure gauge hose attachment
Used to drive bearing in.
Used with oil pressure gauge.
09913-75520
Bearing installer
09916-14510
Valve spring compressor
Used to drive bearing in.
Used to remove and remounting
valve stem
.
09913-75820
Bearing installer
09916H35C00
Valve spring compressor attachment
Used to drive bearing in.
Used with valve spring compressor.
09913-75830
Bearing installer
09920-13120
Crankcase separater
Used to install rear axle shaft oil seal.
Separate to crankcase.
09913-76010
Bearing installer
09920-53710
Clutch sleeve hub holder
Used to drive crankshaft bearing in.
Used to install or remove clutch
sleeve hub nut.
To Next Page
Loading...
