Mash Seventy - Page 210

Special tools
PartNumber ∙
Par
09921-20200
Bearing remover(10mm)
Usedtoremoveoilsealorbearing.
09921-20210
Bearing remover(12mm)
Usedtoremoveoilsealorbearing.
09923-73210
Bearing remover(17mm)
Used to remove bearing with the
rotor remove sliding shaft.
09923-74510
Bearing remover(20~35mm)
Used to remove bearing with the
rotor remove slidingshaft.
09924-84521
Bearing installer
Used to drive small bearing in.
09930-10121
Spark plug socket wrench set
Used to remove or remounting
spark plug.
09930-30102
Rotor remove sliding shaft
Used to with bearing remover or
rotor remover.
09930-30164
Rotor remover
Attached to the top of sliding shaft
when removing rotor.
09930-40113
Rotor holder
Widely used to lock rotary parts
such as a flywheel magneto.
Chapter 8 Information service Section 2 Special tools
8-16
Par
tName ∙ Description
Special tools
Part
Numbe
Bearing remover(10mm)
09930-
44510
Rotor holder
Usedtoremoveoilsealorbearing.
Widely used to lock rotary parts
such as a flywheel magneto.
Bearing remover(12mm)
09940-
10122
Clamp wrench
Usedtoremoveoilsealorbearing.
A hook wrench to adjust the
steering head of motorcycle.
Bearing remover(17mm)
09940-
34520
T-
handleT
Used to remove bearing with the
rotor remove sliding shaft.
Remove and remounting front fork
oil cylinder.
Bearing remover(20~35mm)
09940-
34561
Front fork assembling tool
attachment“D”
Used to remove bearing with the
rotor remove slidingshaft.
Used with T
Bearing installer
09940-
50113
Front fork oil seal installer
Used to drive small bearing in.
Install front fork oil seal.
Spark plug socket wrench set
09941-
34513
Steering race installer
Used to remove or remounting
Usedtoinstallsteeringouterrace.
Rotor remove sliding shaft
09941-
50111
Wheel bearing remover
Used to with bearing remover or
Used to remove wheel bearing.
09943-
74111
Front fork oil level gauge
Attached to the top of sliding shaft
when removing rotor.
Used to drain the fork oil to the
specified level.
09900-
27000
Mode select switch
Widely used to lock rotary parts
such as a flywheel magneto.
Inspect EI system sensor.
Chapter 8 Information service Section 2 Special tools
Numbe
r ∙ PartName ∙ Description
44510
Rotor holder
Widely used to lock rotary parts
such as a flywheel magneto.
10122
Clamp wrench
A hook wrench to adjust the
steering head of motorcycle.
34520
handleT
Remove and remounting front fork
oil cylinder.
34561
Front fork assembling tool
attachment“D”
Used with T
-handle.
50113
Front fork oil seal installer
Install front fork oil seal.
34513
Steering race installer
Usedtoinstallsteeringouterrace.
50111
Wheel bearing remover
Used to remove wheel bearing.
74111
Front fork oil level gauge
Used to drain the fork oil to the
specified level.
27000
Mode select switch
Inspect EI system sensor.