Chapter 3 Engine Section 2 Engine Disassemble and Re-assemble
3—4
Remove the engine ground wire . As in Fig.① 3.2.11
Remove the spark plug cap .②
Separate the starter motor wire . As in fig. 3.2.12③
Detach the generator connector . As in Fig. 3.2.13④
Separate the gear switch connector and the neutral ⑤
switch connector . As in Fig. 3.2.14⑥
Remove the Cylinder wall sensor.As in Fig.3.2.15
Fig.3.2.11
Fig.3.2.12
Fig.3.2.13
Fig.3.2.14
Fig.3.2.15
To Next Page