MASSEY FERGUSON 5400 - Disassembling the Hydraulic Cover

Massey Ferguson 5400 - Issue 1.a
05D02.16
GBA20 Speedshift with Power Shuttle
F . Disassembling the hydraulic
cover
25. Remove the splined hub (15).
26. Remove intermediate plates (30), discs (42) and
spring washers (43).
N
OTE:
The clutch consists of:
- two friction discs;
- two spring washers;
- three intermediate plates.
27. Remove piston (28) by lightly tapping the cover
(25) on a wooden wedge or using a jet of
compressed air (Fig. 12).
28. Remove seals (26) and (29) and discard them.
28 25
MA-05-00367A
Fig. 12