MASSEY FERGUSON 5400 - Bearing; Disassembling and Reassembling the Rear Bearing

Massey Ferguson 5400 - Issue 1.a
07D01.9
GPA20 shiftable shaft
D . Disassembling and reassembling
the rear bearing
Preliminary operations
12. Remove the rear bearing. Carry out operations 1 to
6.
Disassembly
13. Remove the O'ring (18).
14. Take off circlip (8).
15. Separate cover (14) from bearing (10).
16. Remove snap ring (9).
17. Extract bearing (10) from shaft (13).
18. Extract sealing ring and deflector (12).
Reassembly
19. Using a press and a suitable fixture, fit deflector
(12) up against the cover, carefully following the
direction of assembly (Fig. 7).
20. Using a press and a suitable fixture, insert the
sealing ring (11) flush with the chamfer machined
onto the cover (14), with its lip turned towards the
bearing (10) (Fig. 7).
21. Install the housing unit (14) components, carry out
operations 13 to 17 in reverse order, and refit the
rear bearing.
Final operation
22. Refit the rear bearing and repeat operations 7 to
11.
Fig. 7