Massey Ferguson 5400 - Issue 1.a
06E01.24
GPA20 differential
116.
Refit the lift cover and brake pistons (see section
6).
117.
Refit the left- and right-hand trumpet housings (see
section 6).
118.
Refit the stabiliser supports.
119.
Refit the hitch support (see section 6).
120.
Refit the wheels. Tighten to a torque of 400 - 450
Nm.
121.
Couple the tractor between the gearbox and rear
axle.
122.
Top up the oil level in the housings and check it on
the gauge located at the rear of the rear axle.
Remove the safety chocks. Refit the body (if
removed).
123.
Prepare for service. Bleed the main brakes and
trailer brake (if fitted) (see section 9). Carry out a
road test. Check the correct operation of controls
and electrical circuits.
124.
Check the oil tightness of the trumpet housing
mating faces with the housing, covers and
hydraulic unions.
L . Service tools
Tool available in AGCO SA network
- 3376 847 M91 - Shimming tool (Fig. 35)
Fig. 35
To Next Page
Loading...
