Massey Ferguson 5400 - Issue 1.a
05B02.3
Input unit - GBA20 with Power Shuttle
A . General
The input unit with Power Shuttle is in the form of an
interchangeable module on which a Power Shuttle is
assembled.
It is fitted at the gearbox input.
It is made of two separate parts:
- the Power Shuttle (see section 5) ;
- Speedshift.
The input unit is fed with movement from the Power
Shuttle and transmits it to the transmission by means
of a drive pinion located in the rear compartment of the
unit.
Speedshift
This is an independent function allowing to obtain two
gearbox input ratios.
It is located in front of the driving pinion of the gearbox
input gear train.
It consists of a hydraulic mechanism and an epicyclic
gear train.
For operation, see section 5.
To Next Page
Loading...
