MASSEY FERGUSON 5400 - Disassembly

Massey Ferguson 5400 - Issue 1.a
06F01.7
GPA20 hitch / Linkage
C . Disassembly
8. Place the cover on a workbench.
9. Remove the elbow union (23).
10. Unscrew the nut (16) and remove the ground
speed sensor (15).
11. Unscrew the nut (25) and remove the position
sensor (26).
For tractors fitted with 4-speed LSPTO
(Fig. 5), carry out operations 12 to 15.
12. Loosen the Allen screw (22) in the linkage (21).
13. Remove screw (18).
14. Remove the control finger (19).
15. Remove the O'ring (20).
16. Unlock the screws (2) retaining the lift arms.
17. Loosen the screws.
18. Remove the washers (1).
19. Remove shims (12).
20. Remove the lift arms (5) (11) and the washers (30).
21. Remove the nylon rings (6) and the O'rings (7).
22. Remove the set screws (14) from the cam (9).
23. Extract the lift shaft (4) from the cover.
24. Remove the cam (9).
25. Remove the rings (8) (Fig. 6).
26. Remove the cup plug (17) (2-speed PTO).
Fig. 5
Fig. 6