MASSEY FERGUSON 5400 - Analysing Other Error Codes

WINTEST - Issue 5.a
GUF513.21
AUTOTRONIC 5 - PowerShuttle - Error codes
D . Analysing other error codes
Error Description
Reaction of the
System
Solutions
Resetting the system
after clearing error
210 Engine speed drops by more
than 50% or to under 500 rpm
PTO locked Ensure that the tool is
suitable for use with the
tractor and that the engine
is not working at
underspeed, because the
PTO is protected to
prevent it from stalling the
engine
Press the clutch pedal to
contact the BOCor:
move the PTO switch
from ON to OFF
301 PowerShuttle calibration:
temperature too low
Calibration in
standby
Place vehicle in conditions
required to carry out
calibration
Wait
302 PowerShuttle calibration:
temperature too high
303 PowerShuttle calibration:
wrong engine speed
Calibration
stopped:
Press the clutch pedal to
contact the BOC
304 PowerShuttle calibration:
ground speed not zero