MASSEY FERGUSON 5400 - Layout of Hydraulic Lines

Massey Ferguson 5400 - Issue 1.a
09I02.5
Assisted brake master cylinders
B . Layout of hydraulic lines
Characteristics
(1) Accumulator (Fig. 4)
- Manufacturer ................... Olaer
- Type ................................. 1/20
- Capacity ........................... 1 litre
- Gas................................... Nitrogen
- Inflation pressure ............. 9 ± 1 bar
N
OTE: The pressure should be checked every
6 months, with the engine stopped.
(2) Non-return valve (Fig. 4)
- Manufacturer ....................Parker
N
OTE: When reassembling the non-return valve, turn
the arrow engraved on its body so that it points in the
direction of fluid flow.
(3) Main accumulator for Speedshift unit (Fig. 4)
(4) To brake hydraulic power assistance (Fig. 4)
Fig. 4
17 bar low pressure
Gas