MASSEY FERGUSON 5400 - Service Tools

Massey Ferguson 5400 - Issue 1.a
05F01.26
GBA20 selector rails with mechanical reverse shuttle
Final operations
121. Refit the input unit (see chapter 5).
122. Adjust the selector (2) (see § E).
123. Refit the selector cover (see chapter 5).
124. Assemble the tractor between the engine and the
gearbox (see chapter 2).
125. Top up the oil level in the housings. Check it using
the gauge at the rear of the centre housing.
126. Bleed the hydraulic unit of the engine clutch (see
chapter 9).
127. Carry out a road test of the reverse shuttle
(forward and reverse positions) and the control
assembly.
128. Check the oil tightness of the mating faces and
hydraulic unions.
F . Service tools
Tools available in the AGCO network
• 3378325M11: Hare / Tortoise fork lock adjustment
tool (Fig. 30)
• 3378054M1: Adjusting gauge (Fig. 31)
Locally made tool
• Shim hinged on suitable fixture (Fig. 32)
Fig. 30
MA-05-05034A
Fig. 31
Fig. 32