Massey Ferguson 5400 - Issue 1.a
05F02.22
GBA20 selector rail with Power Shuttle
Check
87. Check the operation of the Hare and Tortoise
ranges.
88. Check the smooth operation of all gears.
Final operations
89. Refit the right-hand hydraulic cover (see chapter 9).
90. Refit the selector cover (see chapter 5).
91. Reconnect and adjust the creeper unit control (if
fitted) (see chapter 5).
92. Refit the rear wheel. Tighten the wheel nuts to a
torque of 400 - 450 Nm.
93. Top up the oil level in the housings. Check it using
the gauge at the rear of the centre housing.
94. Carry out a road test:
- of gears from 1st to 4th and vice versa;
- of the Hare / Tortoise ranges;
- of the creeper unit (if fitted).
95. Check for the oil tightness of the cover mating
faces and the hydraulic unions.
To Next Page
Loading...
