MASSEY FERGUSON 5400 - Page 227

Massey Ferguson 5400 - Issue 1.a
05H02.7
GBA20 mainshaft with Power Shuttle
B . Preliminary operations
1. Split the tractor between the gearbox and the rear
axle (see chapter 2).
2. Split the gearbox from the engine (see chapter 2).
3. Remove the selector cover (see chapter 5).
4. Remove the input unit assembly (see chapter 5).
5. Remove the layshaft (see chapter 5).
6. Remove the selector rail and the forks (see
chapter 5).
Remove the output shaft (see chapter 5).
7. Remove the mainshaft.