MASSEY FERGUSON 5400 - Page 256

Massey Ferguson 5400 - Issue 1.a
06A01.4
General - GPA20 operation
Legend
J Clearance
PPreload
E Apex distance
E = Z + T - (X + Y)
E = 184.955 + T - (X +90.520).
when:
Z: Nominal drive pinion dimension = 184.955 mm
T: Correction of the nominal dimension engraved
on the end of the drive pinion; this may be a posi-
tive or negative value.
X: Dimension of the centre housing stamped on
the rear right-hand side of the housing, behind the
lift ram.
Y: Dimension of the drive pinion with bearing =
90.520 mm.