MASSEY FERGUSON 5400 - Page 363

Massey Ferguson 5400 - Issue 1.a
07A01.5
General - GPA20 operation
B . Existing power take-off types
Removable PTO
- The drive shaft is secured to the double driving
pinion.
- The ratio is chosen by changing the PTO output
shaft, which is provided either with splines to be
driven by the 540 rpm pinion or with splines to be
driven by the 1000 rpm pinion. When the 1000 rpm
pinion drives the shaft, the 540 rpm pinion turns idle
on the shaft.
- The shaft used for the 540 rpm speed has 6 splines.
The shaft used for the 1000 rpm speed has 21
splines.
- The PTO brake acts on the rear bearing cup of the
double driving pinion.
Fig. 3