MASSEY FERGUSON 5400 - Page 508

Massey Ferguson 5400 - Issue 1.b
09E01.6
Auxiliary spool valve
Parts list (Fig. 2)
(1) Inlet unit with flow control valve
(2) Plates with seals
(3) Excess flow rate pipe
(4) Adjustment knob (flow divider)
(5) Single / double acting (SA / DA) change-over
screw
(6) Spool valves (all versions)
(7) Intermediate block (excess flow rate)
(8) Set (2, 3 or 4 spool valves)
(9) Intermediate block
(10) Support
(11) End plate (connection with lift control valve)
(12) Screw
(13) Plug and seal (provisional return)
(14) Screw
(15) Cap and seal (filling)
(16) Plug and seal (provisional return)
(17) Studs and nuts
(18) Pin
(19) Stirrup
(20) Pin
(21) Support (control cable)
(22) Screw