MASSEY FERGUSON 5400 - Page 513

Massey Ferguson 5400 - Issue 1.b
09E01.11
Auxiliary spool valve
Adjustment (Fig. 8)
1. Remove the stop screw (6), the locknut (1) and the
washer (2).
2. Unscrew and remove the knob (4).
3. Without forcing the screw (3), tighten it until the
valve (7) abuts against its seat.
4. Place the knob (4) in contact with the sleeve (5).
5. Unscrew the knob two full turns.
6. Fit and tighten the stop screw (6) to a torque of
20 Nm.
7. Turn the knob to its closed position (
Fig. 6).
8. Fit washer (2) and tighten the locknut (1) to a
torque of 30 - 40 Nm.
MA-09-05037A
4
2
1
6
357
Fig. 8