MASSEY FERGUSON 5400 - Page 66

Massey Ferguson 5400 - Issue 1.a
05B02.6
Input unit - GBA20 with Power Shuttle
10. Remove the remaining screws (1) securing the
unit to the gearbox (Fig. 5) without touching
screws (2) (8 mm Allen key) (Fig. 5).
11. With the help of an assistant, carefully pull the unit
forward.
12. Pull out the unit from the gearbox and remove it.
W
ARNING: Use a handling bar to
prevent the input unit from tipping over during
removal.
13. Discard the O'rings (3) (Fig. 6).
14. Remove the tool and the handling bar.
15. Position the unit vertically.
16. Separate the Power Shuttle reverse clutch from
the input box unit (see section 5).
2
1
1
1
2
MA-05-00310B
Fig. 5
Fig. 6