MASSEY FERGUSON 5400 - Page 747

Massey Ferguson 5400 - Issue 1.a
11B10.3
AUTOTRONIC 5 - Description
A . General
The Autotronic 5 is the transmission controller fitted to
5400 tractors with PowerShuttle.
The Autotronic 5 controls the automatic functions of
the transmission according to the driver's actions and
information from the various sensors.
The Autotronic 5 controls:
- PowerShuttle
- Hare / Tortoise range
- Power take-off
With Wintest, the Autotronic 5 can be :
- programmed: updating of functions control
- parameterised: identified by a 8-digit code indicating
the model of the tractor it is fitted to.
- tested: testing the Autotronic 5 inputs, outputs and
functioning.
The Autotronic 5 is fitted inside the cab right hand side
console, it is fixed between the hand throttle lever and
the hydraulic spoolvalves control levers.
Important: The Autotronic 5 case must be connected
to earth.
The Autotronic 5 is easily identified by its label (Fig. 1).
and possesses one 42-pin connector.
Parst list (Fig. 1)
(1) Autotronic 5 part number
(2) Hardware program version
(3) Software program version
(4) Autotronic5 serial number
(5) Date of production (09 03 = 9th week of 2003).
Fig. 1