MASSEY FERGUSON 5400 - Page 749

Massey Ferguson 5400 - Issue 1.a
11B10.5
AUTOTRONIC 5 - Description
Low pressure < 9 bar ± 1 and
engine speed < 200 tr/min
TRACTOR INITIALIZATION MODE
None function active
Auto 5: Locked
PowerShuttle: Locked
Note : If the battery tension is upper than 16 V, the Autotronic 5 functions remain active, except the Hi/Lo range
that is locked.
+ AC = 0
(a) Low pressure < 9 bar ± 1 and
engine speed < 200 tr/min
+ AC = 12 V - wrong parameters
STANDBY MODE
Auto 5: Locked
PowerShuttle: Locked
Standby Wait
(a) For 6 seconds
(b) For 60 seconds
+ AC = 12 V
Bottom of clucth switch signal
AUTOTRONIC 5 OFF
+ AC = 0
engine speed = 0
low pressure = 0
(b) Engine speed < 200 tr/min
and ground speed < 1kmh
POWERSHUTTLE INITIALIZATION MODE
PowerShuttle: Locked
TRACTOR OK MODE
Hi/Lo range and PTO active
Auto 5: Unlocked
PowerShuttle: Locked
+ AC = 12 V
and parameters OK
Reverse indicator light (red) flashes in
sequence error code 43
(See GUF513)
Low pressure < 9 bar ± 1 and
engine speed < 200 tr/min
Low pressure > 9 bar ± 1 and
engine speed > 200 tr/min
POWERSHUTTLE OK MODE
All functions active
PowerShuttle: Unlocked
PTO and Hi/Lo alarm. All functions
locked except PowerShuttle
POWERSHUTTLE STANDBY 1 MODE
Forward or reverse indicator light flashes
Bottom of clucth switch signal with PowerShuttle lever out of Neutral, low pressure
> 9 bar ± 1 and engine speed > 200 tr/min
Lever in Neutral Bottom of clucth switch signal
POWERSHUTTLE STANDBY 2 MODE
Forward and reverse indicator lights flash simultaneously
Lever in Neutral without bottom of clucth switch signal, low pressure > 9 bar ± 1 and
engine speed > 200 tr/min
Low pressure < 9 bar ± 1 or
engine speed < 200 tr/min
Low pressure > 9 bar ± 1 and
engine speed > 200 tr/min