MASSEY FERGUSON 5400 - Page 751

Massey Ferguson 5400 - Issue 1.a
11B10.7
AUTOTRONIC 5 - Description
C . Autotronic 5 connector pin allo-
cation
The Autotronic 5 includes a 42 pin connector of which
the input/output signals are described below.
MA-11-01268A
1
14
15
28
29
42
Fig. 2
Pin Description Signal
1 CAB18 Bottom of clutch switch (BOC) Initialization
2 CAB12 PowerShuttle lever 10V output
3 TR22 Reverse solenoid valve Return of the output (4A)
4 TR23 Forward solenoid valve Return of the output (4A)
5 TR23 Forward solenoid valve Output (4A)
6 TR22 Reverse solenoid valve Output (4A)
7 Not used
8 51 Economic PTO control Digital input (2A)
9 50 ON/OFF/ PTO brake switch Supply to PTO control transistor
10 Not used
11 TR13 Hare / Tortoise solenoid valve Output (2A)
12 49 Dashboard (PTO indicator light) Output (2A)
13 49 Dashboard (Reverse indicator light) Output (2A)
14 +12V ignition on supply to Autotronic 5
15 Autotronic 5 ground
16 CAB12 PowerShuttle lever Analog input
17 Not used
18 TR16 Hare / Tortoise switch Digital input
19 56 Top of clutch switch (TOC) Digital input
20 TR9 17 bar pressure switch Digital input
21 TR24 Transmission oil temperatur sensor Analog input
22 Not used
23 TR11 PTO solenoid valve Output (2A)
24 Not used