MASSEY FERGUSON 5400 - Page 756

Massey Ferguson 5400 - Issue 1.a
11B10.12
AUTOTRONIC 5 - Description
Operating modes of the Power Shuttle
Note : The user does not choose the mode of opera-
tion
The information received by the Autotronic 5 allows it
to automatically select one of the two operating
modes.
USE
- Start-up
and / or
- Power Shuttle shifting
- Manual shifting using the pedal or lever
OPERATING CONDITIONS
- Speed below 2 kph - Speed above 2 kph
and
- Previous clutch pressure was at least 7.5 bar.
AUTOTRONIC 5 ACTIONS
Without pedal signal
- Automatic pressure increase in clutch limited to 3 bar
Without pedal signal but with lever signal
- Automatic pressure increase in clutch limited to 7.5
bar
With pedal signal
- Pressure increase in the clutch determined by
position of the pedal and limited to 6 bar
With pedal signal but no lever signal
- Pressure increase in the clutch determined by
position of the pedal and limited to 10 bar
With pedal and lever signals
- Pressure increase in the clutch determined by
position of the pedal and limited to 7.5 bar