To Next PageTo Next PageWhat does 'OVER CAPACITY' mean on Max LM-550A2 Label Maker?
If your Max Label Maker displays 'OVER CAPACITY', use another USB memory device or delete unnecessary files from the current USB to free up space.
What does it mean when my Max Label Maker says 'BATTERY VERY LOW'?
When your Max Label Maker indicates 'BATTERY VERY LOW', set the eneloop standard model [BK-3MCC] (recommended) with a remaining charge in the battery.
Why is the screen on my Max Label Maker not turning on or displaying correctly?
If the power is on but the screen of your Max Label Maker doesn't turn on or appears dark/too light, ensure the plug and power cord are securely connected to the wall socket, adapter, and the LM-550A2 series. Adjust the screen brightness in the OPTION menu, as the optimum brightness depends on the ambient temperature.
What should I do if my Max LM-550A2 Label Maker says 'NO USB MEMORY'?
If your Max Label Maker displays a 'NO USB MEMORY' message, the solution is to insert the USB memory into the device.
What to do if the Max LM-550A2 is not printing correctly on the tube?
If you're experiencing issues such as the Max Label Maker not printing on the tube, blurred or sporadic prints, stained prints, incorrect tube length, off-center characters, tube jams, or white horizontal lines, consider the following: * Ensure the cassette cover is securely closed. * Verify the tube and ink ribbon are properly set and the tube diameter is correct. * Check for dirt or stains on the tube or thermal head. * Adjust 'PRINTING DENSITY' in the OPTION menu, and consider using 'LOW TEMP. MODE (20.0mm/s)' in low temperatures. * Make sure the tube isn't tangled, twisted, or jammed, and the feeding roller is clean. Use the 'FEED' function to remove jammed tubes; do not pull by hand.
What to do if Max Label Maker says 'USB MEMORY UNIDENTIFIABLE'?
If your Max Label Maker displays 'USB MEMORY UNIDENTIFIABLE', try formatting the USB memory again using “FAT16” or “FAT32” format. Note that USB memory devices with security features are not compatible.
How do I resolve the 'OVERINPUT CHARACTER SIZE' error on my Max LM-550A2?
To fix the 'OVERINPUT CHARACTER SIZE' error on your Max Label Maker, reduce the number of lines, decrease the line space, or select a smaller character size.
What does 'ERROR IN HALF CUT OPERATION' mean on Max LM-550A2?
If you encounter an 'ERROR IN HALF CUT OPERATION' on your Max Label Maker, try feeding the printed material or replacing the half cutter unit.
What to do if Max Label Maker shows 'OVER PRINTING SIZE'?
If your Max Label Maker displays an 'OVER PRINTING SIZE' error, try reducing the number of lines, decreasing the line space, or using a smaller character size.
Why can't I access my Max LM-550A2 Label Maker LM-550A2 series from the “LETATWIN PC EDITOR” on my computer?
If you're unable to access the LM-550A2 series from the “LETATWIN PC EDITOR” on your computer, verify that the USB cable is securely connected between the LM-550A2 series and your computer. Also, confirm that the “LETATWIN PC EDITOR” and its driver are properly installed.
General| Brand | Max |
|---|---|
| Model | LM-550A2 Series |
| Category | Label Maker |
| Language | English |
Important instructions and warnings for safe and proper operation of the machine.
Covers critical safety information regarding electrical hazards and usage.
Advises on equipment care, environmental factors, and battery safety.
Highlights key capabilities and functionalities of the LM-550A2 series.
Explains the keyboard layout and the purpose of each key for operation.
Details the input screen layout and how to select the machine's display language.
Detailed steps for installing or replacing the ink ribbon in the ribbon case.
Instructions for loading tubes and the ink ribbon case into the machine.
Procedure for loading tape cassettes and the ink ribbon case.
How to perform pitch printing on tubes with specified content.
Procedure for pitch and normal printing text onto tape.
Methods for entering and deleting characters using the machine's interface.
Adjusting character size and width for optimal print appearance.
Configuring pitch length, pitch cut, and normal print parameters.
Covers density, LCD, font choices, and other advanced configurations.
Specifying print range, block repetition, and 180° rotation.
Adjusting the total printing length for tubes or tapes.
Steps for installing the 'LETATWIN PC Editor' and printer driver.
Printing and saving data directly between PC and the machine.
Common error messages and their corresponding countermeasures.
Solutions for common printing, tape, cutting, and USB issues.
Detailed technical data including dimensions, speed, and power requirements.
Regulatory compliance, FCC notice, and disposal guidelines.
