DP-20 PLUS Web Guide Controller 6-24
4th Quarter 2021 © 2021 Maxcess International. All rights reserved. Figure Sheet 2-320 A
7. Press the ENTER key to accept the password.
CHANGE and DISABLE will be displayed on
Line 4. CHANGE will be flashing.
8. Use the ARROW keys to select DISABLE.
DISABLE will then begin flashing.
9. Press the ENTER key to delete the password or
press the MANUAL key to abort the procedure.
The system will exit the setup menus and return
to the Operator Level.
3X.3.3, Set Password, Change Password
(Use these menu instructions only if a password is currently stored).
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
2. Use the ARROW keys to scroll until
ADVANCED is displayed on line 4.
3. Press the ENTER key to enter the Advanced
Menus. The RESTORE SETTINGS menu will be
displayed.
4. Use the ARROW keys to scroll until SET
PASSWORD is displayed on line 3.
(ENABLED) which is displayed on Line 4,
indicates that a password is currently enabled.
5. Press the ENTER key to enter the SET
PASSWORD menu. ENTER PASSWORD will
be displayed on line 3.
6. Using the proper keys, enter the current
password. Each key press is indicated by an “*“
on Line 4.
7. Press the ENTER key to accept the password.
CHANGE and DISABLE will be displayed on
Line 4. CHANGE will be flashing.
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.3
SETUP (MAN)
SELECT MENU
ADVANCED
× X3A.3.3
SETUP (MAN)
SET PASSWORD
(ENABLED)
× X3A.3.3
SETUP (MAN)
ENTER PASSWORD
× X3A.3.3
SETUP (MAN)
ENTER PASSWORD
******
× X3A.3.3.1
SETUP (MAN)
SET PASSWORD
CHANGE DISABLE
× X3A.3.3.1
SETUP (MAN)
SET PASSWORD
CHANGE DISABLE
× X3A.3.3.1
SETUP (MAN)
SET PASSWORD
CHANGE DISABLE
× 3A.3.1
SETUP (MAN)
RESTORE SETTINGS
× 3A.3.3.5
SETUP (MAN)
(NO PASSWORD)
To Next Page
Loading...
Need help?
General
