Maxcess FIFE DP-20 PLUS User Manual

DP-20 PLUS Web Guide Controller 6-33
4th Quarter 2021 © 2021 Maxcess International. All rights reserved. Figure Sheet 2-320 A
Custom Menus
3X.5.1, LCD Contrast
This procedure is used to adjust the LCD contrast.
1. Press the SETUP key to enter the Setup Menus.
The SELECT MENU screen will be displayed.
2. Use the ARROW keys to scroll until CUSTOM is
displayed.
3. Press the ENTER key to enter the Custom
Menus. The LCD CONTRAST menu will be
displayed. The current setting is displayed on
line 4.
4. Press the ENTER key to enter the LCD
CONTRAST menu. The contents of line 4 will
begin flashing.
5. Use the ARROW keys to adjust the LCD contrast
for best viewing.
6. Press the ENTER key to store the new setting or
press the MANUAL key to abort the change. The
system will exit the setup menus and return to
the Operator Level.
3X.5.2, ASC Control
This procedure is used to set the ASC Control to ON or OFF. This setting is
configurable for each sensor mode.
1. Press the SETUP key to enter the Setup Menus.
The SELECT MENU screen will be displayed.
2. Use the ARROW keys to scroll until CUSTOM
is displayed.
3. Press the ENTER key to enter the Custom
Menus. The LCD CONTRAST menu will be
displayed.
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.5
SETUP (MAN)
SELECT MENU
CUSTOM
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.5
SETUP (MAN)
SELECT MENU
CUSTOM
× 3A.5.1
SETUP (MAN)
LCD CONTRAST
ãããããÜÜÜÜÜ 50%
× 3A.5.1
SETUP (MAN)
LCD CONTRAST
ãããããÜÜÜÜÜ 50%
× 3A.5.1
SETUP (MAN)
LCD CONTRAST
ãããããáÜÜÜÜ 56%
3A
MANUAL
× -ãããããáÜÜÜÜ+
× 3A.5.1
SETUP (MAN)
LCD CONTRAST
ãããããÜÜÜÜÜ 50%

Maxcess FIFE DP-20 PLUS Specifications

General

Brand	Maxcess
Model	FIFE DP-20 PLUS
Category	Controller
Language	English