286
Controls in detail
Useful features
1 Compartment lid release
2 Information button ¡
3 Roadside Assistance button •
왘 Press and hold Roadside Assistance
button • (for longer than
2 seconds).
A call to a Maybach Roadside
Assistance dispatcher will be initiat-
ed. The button • flashes while the
call is in progress. The message
CONNECTING CALL
will appear in the
multifunction display and the audio
system is muted.
When the connection is established, the
message
CALL CONNECTED
appears in the
multifunction display. The Tele Aid sys-
tem will transmit data generating the ve-
hicle identification number, model, color
and location (subject to availability of
cellular and GPS signals).
A voice connection between the Road-
side Assistance dispatcher and the occu-
pants of the vehicle will be established.
왘 Describe the nature of the need for
assistance.
The Maybach Roadside Assistance dis-
patcher will either dispatch a qualified
Maybach technician or arrange to tow
your vehicle to the nearest authorized
Maybach Studio. For services such as la-
bor and/or towing, charges may apply.
Refer to the Roadside Assistance manual
for more information.
The following is only available in the
USA:
앫 Sign and Drive services: Services such
as a jump start, a few gallons of fuel
or the replacement of a flat tire with
the vehicle spare tire are obtainable.
i The indicator lamp on the Roadside Assis-
tance button • remains illuminated in red
for approximately 10 seconds during the sys-
tem self-check after switching on ignition
(together with the SOS button and the Infor-
mation button ¡).
See system self-check (컄 page 282) when the
indicator lamp does not come on in red or
stays on longer than approximately
10 seconds.
If the indicator lamp on the Roadside Assis-
tance button • is illuminated continuously
and there was no voice connection to the Re-
sponse Center established, then the Tele Aid
system could not initiate a Roadside Assis-
tance call (e.g. the relevant cellular phone
network is not available). The message
CALL
FAILED
appears in the multifunction display.
Roadside Assistance calls can be termi-
nated using the t button on the mul-
tifunction steering wheel or the
respective button for ending a tele-
phone call on the COMAND head unit.
To Next Page
Loading...
