MAYBACH 62 S - Page 447

445
Technical data
Fuels, coolants, lubricants, etc.
Anticorrosion/antifreeze
Your vehicle contains a number of alumi-
num parts. The use of aluminum compo-
nents in motor vehicle engines
necessitates that anticorrosion/anti-
freeze coolant used in such engines be
specifically formulated to protect the
aluminum parts. Failure to use such
anticorrosion/antifreeze coolant will re-
sult in a significantly shortened service
life.
Therefore, the following product is
strongly recommended for use in your
vehicle: MB 325.0 Anticorrosion/
Antifreeze agent.
Before the start of the winter season (or
once a year in hot southern regions), you
should have the anticorrosion/antifreeze
concentration checked. The coolant is
also regularly checked each time you
bring your vehicle to an authorized
Maybach Studio for service.
The anticorrosion/antifreeze quantities
listed in the table below are in relation
to total filling capacity.
Anticorrosion/antifreeze quantity
Approx. freeze protection
-35°F (-37°C) -49°F (-45°C)
All models (main cooling system) 9.0 US qt (8.5 l) 9.9 US qt (9.4 l)
Maybach 57, Maybach 62 (low temperature cooling system) 1.16 US qt (1.1 l) 1.27 US qt (1.2 l)
Maybach 57 S, Maybach 62 S (low temperature cooling
system)
1.27 US qt (1.2 l) 1.37 US qt (1.3 l)