MB Connect Line mbNET.mini User Manual

Interval [h] Enter the value (in hours) for the NTP polling interval here.
Input => natural numbers [h] > 0.
NOTICE
If you leave this blank or enter "0", there will be no time calibration.
NOTICE
Changes in the portal, which concern the device, will take effect after the Portal configuration has been
transferred to the device.
If the device configuration is out of date, this is indicated by a gray LED symbol before the device name
.
Configuring your Router in the Remote Service Portal (V 2.x) | Page 105 of 131

MB Connect Line mbNET.mini Specifications

General

Brand	MB Connect Line
Model	mbNET.mini
Category	Network Router
Language	English