12.8.3 Diagnostics
In case of a failed connection setup, the diagnostic
page supports for troubleshooting.
Ping Here, it is possible to enter an internet page or an IP address. When actuating
the "Ping" button, the ping command is executed. This ping command easily de-
termines whether an internet communication exists or whether a specific comput-
er is available.
TraceRoute Here, it is possible to enter an internet page or an IP address. When actuating
the "TraceRoute" button, the routing command is executed. This command starts
a route tracing and visualizes it. This allows you to get much more information on
a network connection.
NS Lookup Check the function of the nameserver with the button "NS Lookup". There's no
matter what kind of internet connection you have chosen.
Port Check By entering the test address with an attached port, determine whether this port is
enabled at the receiving end.
Result In this box, the result of the respective function is displayed.
NOTICE
Please note that only one result is displayed from an action. Each action will
overwrite the result of a previous query.
Initial configuration | Page 79 of 131
To Next Page
Loading...
Need help?
General
