12.4.3 Transferring configuration to the device - via mbDIALUP
For this, the mbNET.mini must be accessible
from a PC on the LAN, irrespective of its LAN
IP, and the computer must have a connection to
mbCONNECT24 portal.
Click "Submit configuration to device"
The system now performs a scan and
displays all mbNETs that are connected to
the LAN.
If the assignment of the configuration file to
the identified device is correct, click on "go
>>" to confirm.
Initial configuration | Page 53 of 131
To Next Page
Loading...
