In the next window click on
„start configuration transfer“.
The settings from mbCONNECT24 are now
copied to the device.
If all items have been processed, acknowl-
edge the transfer by clicking the "Finished"
button.
If the mbNET.mini is able to connect to the Internet (e.g. network, telephone cable, SIM card, antennae in-
stalled), the device will subsequently log in to your account. This is displayed by the flashing LED Con.
If the flashing frequency of the LED Con is 3 Hz, the device attempts to log into the portal. When the login is
successful, the flashing frequency is reduced to 1.5 Hz.
Page 54 von 131 | Version: 2.2.1 - EN | Mar 28
th
, 2022 |
To Next Page
Loading...
Need help?
General
