17.2 Firmware update via RSP mbCONNECT24
Navigation:
Administration > Projects > Project Gama (selected project) > GamaRouter (selected device) > Services
Prerequisites:
•
You operate the device in the RSP mbCONNECT24 V 2.x.
•
The device is online in the portal.
How to do:
Call up the device settings of the relevant device.
1.
Under Services > System Settings, you will receive a hint as soon as the device firmware is no longer
up-to-date, with the prompt by clicking on this note to perform a firmware update.
2.
In the following window, you are prompted to confirm the firmware update.
3.
Now you get the information about the firmware version (from version> to version) and that the device
must not be switched off during the update.
Firmware update | Page 125 of 131
To Next Page
Loading...
Need help?
General
