Release notes:
Version Date Comment
V 1.9 DR01 June 12
th
, 2017 Previous version V 1.9
V 1.9 DR02 Jan 25
th
, 2018 General changes (text and graphics)
V 1.9 DR03 May 4
th
, 2018 Note in the Technical Specifications on missing CE conformity for MDH 862 AT&T.
V 2.0 Mar 11
th
, 2019 The following new device types have been added: MDH 865, MDH 866 EU, MDH
866 AT & T and MDH 867. Technical feature of the new types: 3 x LAN interface, 1 x
WAN interface with failover function WAN > Modem / Wi-Fi.
V 2.0 DR01 Apr 29
th
, 2019 Correction in chapter 11.3 Initial configuration via the device web interface: "You
must enter the IP address of the mbNET.mini (192.168.0.253) as the default gateway
and as the preferred DNS server."
This information is incorrect and has been deleted.
V 2.0 DR02 Oct 1
st
, 2019 The chapter ""Maintenance"" has been added, with the remark to check at regular in-
tervals the actuality of the firmware installed on the device.
V 2.0.6 Nov 18
th
, 2019 For devices with hardware version HW 02 and firmware from V 2.0.6 , the two I/Os
can be configured independently of each other as a digital input or digital output.
V 2.0.6 DR01 Jan 14
th
, 2020 Changed data (frequencies and target region) for devices with LTE (4G) module
(MDH 862 EU, MDH 866 EU) with hardware version: HW03
V 2.0.8 May 11
th
, 2020 Change of access data for the device web interface (see chapter "Factory settings on
delivery").
An individual device password now applies to the devices described above under
"Validity of this documentation".
You will find this password on the back of the device.
V 2.0.8 DR01 July 6
th
, 2020 Add the transmission power of radio modules in the technical data.
V 2.0.8 DR02 Jan 20
th
, 2021 Adding chapter 13.4, "Digital I/O"
Change of alarm management for devices with freely selectable I/Os (only in con-
junction with the remote service portal V 2.x). See chapter 13.5, "Alarm manage-
ment".
Change of server locations for RSP mbCONNECT24 => server location CHINA has
been replaced by server location ASIA. Please refer chapter 12.8.1, "First Start" >
Cloudserver.
V 2.2.0 June 28
th
, 2021 Description of the SIMPLY.connect functionality (S
3
).
Extension of the LED light codes for devices with SIMPLY.connect functionality (S
3
).
Description of the API for the status display in chap. Device State.
V 2.2.0 DR01 Oct 27
th
, 2021 NOTICE of data loss when switching off the mbNET, before the mbNET has picked
up its configuration from the mbCONNECT24 portal - see chapter "First Start".
Correction of the performance data for the Digital Outputs: Changed from 1.5 A to 0.5
A per output.
V 2.2.1 Mar 28
th
, 2022 Addition of the chapter "Disposal of old devices"
Update of chapters "Scope of Supply" and "Technical data"
Additional documentation
"First steps mbCONNECT24" - This document describes the initial steps and actions that are necessary to
connect an mbNET industrial router to the portal with the remote client mbDIALUP.
Currently manuals and more information
The latest manuals and more information about products related to secure remote maintenance can be found
on www.mbconnectline.com
General | Page 7 of 131
To Next Page
Loading...
Need help?
General
