CRIMP DATA ANALYZER
CDA10
REV.01
REVISION
The information contained in this manual is the property of Mecal S.r.l.
The drawings and other documents accompanying the machine are the property of Mecal S.r.l.
Distributing and/or duplicating this manual in any form, whole or partially, without written
authorisation from Mecal S.r.l. is prohibited.
Mecal S.r.l. reserves the right to modify the characteristics of the product described in this manual
without notice.
In case of doubts or difficulties in understanding or interpreting this manual, the original/official
version indicated as "ORIGINAL INSTRUCTIONS" on the cover must be considered as the valid
version.
All of the images included in this manual should be considered as examples only, as they may not
refer to the machine described here.
Crimp Data Analyser – CDA10 addressed by this manual will hereinafter
be referred to as "interchangeable equipment" or "equipment".
Crimp Data Analyser – CDA10 is an interchangeable device which,
assembled with a main system called "machine," adds a new function to the
latter.
To Next Page
Loading...
Need help?
General