CRIMP DATA ANALYZER
CDA10
REV.01
STRUCTURE OF THE MANUAL
The manual is divided into 9 chapters, the last of are the attachments.
CHAPTER 1 - GENERAL INFORMATION
This chapter contains general descriptions regarding the structure of the manual.
CHAPTER 2 - SAFETY
This chapter contains a description of the standards, the environmental operating conditions,
ergonomics, the accident prevention devices used, the residual risks and the monitoring plates
applied to the machine.
CHAPTER 3 - GENERAL DESCRIPTION
This chapter contains a description of the operating principles of the machine, the work cycle, the
general technical data and the description of the mechanical, electrical and fluidic units making up
the machine itself.
CHAPTER 4 - PACKAGING AND TRANSPORT
This chapter contains instructions for correctly packaging, handling, transport and unloading at the
user facility.
CHAPTER 5 - INSTALLATION
This chapter contains instructions for correctly carrying out installation at the user facility,
connections to the facility's power supplies, verifications, checks and any adjustments to be carried
out before start-up.
CHAPTER 6 - USE
This chapter, intended for operators and maintenance personnel, contains instructions for starting
and using the machine in its various operating cycles, with descriptions of the controls available to
the operator, the most important operating sequences and use of the diagnostic systems.
CHAPTER 7 - DISMANTLING
This chapter contains warnings and instructions for correctly performing decommissioning and
dismantling of the machine at the end of its operational life.
CHAPTER 8 - MAINTENANCE
This chapter, intended for maintenance technicians, contains the machine maintenance plan. It
provides warnings, precautions and instructions for properly performing maintenance operations
on the machine.
CHAPTER 9 - ATTACHED DOCUMENTATION
To Next Page
Loading...
Need help?
General