Medivators ADVANTAGE PLUS - Warning Errors and Troubleshooting Actions

108
Control Errors (SCU)
Code Description
S-300 SCU message: F.../S…/T…
S-301 SCU in “OK” state
S-302 SCU : wrong conguration
S-304 SCU no connection
S-310 Spray arm speed below minimum
S-311 Spray arm speed above maximum
S-350 Manual control active
S-360 Stopped by the operator
Warnings Errors
Code Description
W-701 SCU: No connection
W-702 SCU: Wrong conguration
W-703 SCU: Incorrect status and lid inactive
W-704 SCU: Incorrect status
W-705 SCU: in “OK” status
W-711 Lid is open.
W-712 Lid will not open
W-713 Lid will not close
W-715 Basin not empty
W-716 Fluid leak detected
W-721 Water temperature sensor defective
W-743 Sensor S03: Detergent high
W-744 Sensor S17 Minimum level high
W-749 Sensor S24: Alcohol high
W-751 Sensor S11 Leak test high
W-753 Sensor S25 high
W-754 Sensor S26 high
W-757 Sensor S33 high
W-764 Channel sensor S04 high (Air)
W-765 Channel sensor S05 high (Biopsy)
W-766 Channel sensor S06 high (Jet)
W-767 Channel sensor S07 high (Suction)