Medivators ADVANTAGE PLUS - Software System

33
Figure 11 Bar Code Reader for Operator Login and Endoscope ID
Software System
Available Programs
Three separate programs control the MEDIVATORS
®
ADVANTAGE PLUS
®
Automated Endoscope
Reprocessor:
1. LIO (Logic Input/Output) is the main software program that operators use to perform and run an
endoscope cycle. This part of the software controls the MEDIVATORS ADVANTAGE PLUS System
and is what runs and displays on the PC monitor. This program is used most often by daily operators
of the reprocessor.
2. Management is the software program for managing endoscopes, users and cycle information. It allows
an administrator access to input data, process reports, and can manage multiple MEDIVATORS
ADVANTAGE PLUS System reprocessors..
3. Print Service automatically prints a certicate to the cycle log printer which is dedicated to each
reprocessor. The certicate contains system information and reprocessing cycle details pertaining to a
specic reprocessing cycle.