Medivators ADVANTAGE PLUS - Storage; Transport

16
Storage
If the MEDIVATORS
®
ADVANTAGE PLUS
®
Automated Endoscope Reprocessor will be out of service
for an extended period of time, the following steps must be followed:
• Remove the side covers, purge all liquids from the system, and then replace the covers.
• Place a covering over the unit to protect it from dust and moisture.
• The storage temperature must not go below 0°C (32°F), or exceed 60°C (140°F).
• The maximum relative humidity must not exceed 80% during storage.
Transport
The MEDIVATORS ADVANTAGE PLUS System can be safely moved on a smooth, level oor. However,
if you encounter any thresholds or oor level changes, the base cover must be removed to avoid damage.
For all other moves, place the MEDIVATORS ADVANTAGE PLUS System on a pallet with a kraft liner.
Before moving MEDIVATORS ADVANTAGE PLUS System, ensure the electrical cord, drain line and
water supply are either disconnected or are appropriate lengths to accommodate the relocation of the
machine.